For coolants (RB Series)
Motor capacity 3-phase, 200 V, 15 W
Motor rotation speed 27/31r.p.m
Belt width 20mm
Recovery capability Approx. 12 l/h (For mineral oil)
Installation depth (L) 115mm,165mm,250mm,350mm,400mm ＊Contact us about different voltage, CCC and CE certificates. Belt types other than listed above are available.
Structure and Description
Floated oil in the machining tank and washing tank is recovered by the specially-developed belt. The oil skimmer contributes to machining accuracy improvement, machining fluid corruption and deterioration prevention, and washing accuracy improvement.
The floated oil is absorbed on the belt while the belt goes into the fluid. As shown to the right, Model TB-75 (for washers) has a special belt suitable for quick and efficient recovery of dirty washing fluid and floated oil. Also, Model RB-200 (for coolants) has a special belt suitable for efficient recovery of floated oil such as lubricant.
For coolants（Model RB-200）
A palm-sized model. Suitable for downsizing of machine tools.
○ Highly-efficient floated oil recovery is achieved by the oleophilic and water-shedding special flat belt.
○ The recovery amount is constant as long as the belt touches the liquid level, i.e., the specially designed for liquid level change.
○ For the coolant tank use only. Not suitable for high-temperature liquid.
Untuk informasi lebih lanjut silakan hubungi :
PT. Wiratama Mitra Abadi
Jl. Dewi Kunti II No. 2 Kalimalang - Bekasi
Kantor Cabang :
Perumnas Teluk Jambe Block C No. 53
Phone : 085 100 711 033, 085 105 062 090
Mobile : 6287780553773, 62812 8208 4779
Email : sales@wmablog.com
Website : www.flowmasonic.com
Blog : www.wmablog.com
Skype : Wiratama Mitra Abadi
WA : 081218618184