TDS 100H Ultrasonic Flow Meter is designed to measure the fluid velocity of liquid within a closed pipe, It is a hand held measurement system which is both easy to use and install. The PCE-TDS 100H Ultrasonic Flow Meter operates according to the difference in the transit time measured. The measuring principle of the PCE-TDS 100H Ultrasonic Flow Meter is very easy. In a diagonal measurement the tube will need less time in the same flow direction than against flow direction. When the flow increases, it will need more time to measure flow if the measurement is against flow direction and less time if the measurement is in the same flow direction. The difference between the flow direction, will directly depend on the flow velocity. The PCE-TDS 100H Ultrasonic Flow Meter determines the flow velocity. Electro acoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a flange. The display will quickly show the flow velocity. The PCE-TDS 100H can be used for metallic, plastic and rubber tubes.
- Ideal for equipment
- Installation without process interruption
- Easy installation
- Accurate and reliable
- No pressure loss
- Inspections are not needed, without any mobile parts
- No wear
- Handhold device for control measurements
SPECIFICATION
Handheld ultrasonic flowmeter
TDS-100H handheld ultrasonic flow meter is a battery-powered ultrasonic flow meter with the capability of a full-size flow meter. It is carefully designed for portability and ease of use.
Features:
- Better than 1% accuracy.
- 0.2% of repeatability.
- Positive/negative/net flow totaliser
- 4 line LCD display.
- Operate with clamp-on transducers.
- RS-232/OCT output
- Ni-MH Battery life for up to 12 hours continuous operation.
